ME home

Article Abstract

  SME FaceBook SME Twitter SME LinkedIn RSS Feed

Design of a continuous pilot-scale deslime thickener

Minerals & Metallurgical Processing , 2017, Vol. 34, No. 1, pp. 1-9

Haselhuhn, H.J.; Kawatra, S.K.

DOI: https://doi.org/10.19150/mmp.7243


Thickening is used during two primary mineral processing operations: water removal and desliming. During water removal, the pulp density is increased through the injection of flocculants. These flocs settle and create a dense pulp while clarified water is removed through the overflow. During desliming, fine particles are removed through the overflow. Desliming can also be used as a mineral separation process known as selective flocculation-dispersion, where valuable minerals are flocculated and gangue minerals remain dispersed and exit through the overflow.
     There are many ways to analyze thickener performance on a laboratory scale, but these analyses often do not correlate well with full-scale performance. Some pilot-scale systems have been designed using a semicontinuous approach, but the amount of material required to perform their tests can make semicontinuous pilot thickeners impractical for most applications. This paper focuses on the design and optimization of a continuous pilot-scale deslime thickener that requires minimal material to operate. The design, optimization strategy, and an example study of reagent selection are demonstrated.